Magnetic Stirrer Hotplate Mixer (MS-300)

Magnetic Stirrer Hotplate Mixer (MS-300)

  • Model:- MS-300.
  • Stirring Speed:- 0 to 1250 rpm.
  • Weight:- 2.2kg.
  • Timer Range:- 0 to 999 minutes.
  • Top Plate Size:- 135 (L) x 135 (W)mm.
  • Power Requirements:- AC220V/50Hz.
  • Ambient Temperature:- <50°C.
  • Dimensions:- 230 (L) 180 (W) x 120 (H)mm.
  • Maximum Stirring Volume:- 2 Liters (H20).
  • Temperature Range:- Room temperature to 300°C.
SKU: MS-300 Category:

Description

Hotplate magnetic stirrer, adjustable stirring time, maximum heating temperature up to 300°C.

Specifications
Name Details
Model MS-300
Stirring Speed 0 to 1250 rpm
Weight 2.2kg
Timer Range 0 to 999 minutes
Top Plate Size 135 (L) x 135 (W)mm
Power Requirements AC220V/50Hz
Ambient Temperature <50°C
Dimensions 230 (L) 180 (W) x 120 (H)mm
Maximum Stirring Volume 2 Liters (H20)
Temperature Range Room temperature to 300°C
Features
  • MS-300 is a high-performance hotplate magnetic stirrer that comes with a temperature probe.
  •  The large LCD display clearly shows the timer, temperature, and running status.
  • The automatic constant temperature through a connected sensor.
  • One point offset calibration ensures accurate temperature control.
  • Push-button speed control effectively avoids that the hot-liquids hurt the operator.
  • Adjustable heating temperature, stirring times, and speeds.
Instruction

Thank you for selecting the MS-300 Magnetic Stirrer Hotplate Mixer. This will provide a step-by-step guide to help you operate the stirrer. So, please carefully read the following instructions before use.

The following list describes the accessories of the stirrer. After the unpacking, please check all accessories are complete. If any are damaged or missing, please contact the nearest distributor.

Magnetic Stirrer Hotplate Mixer MS-300-1

Stirring the Liquids

Before plugging the plug into the power outlet, ensure that the local mains power voltage matches the stirrer requirements.

  1. Place the stir bar into the container. Press the power switch to the ON position, the display will light up.Magnetic Stirrer Hotplate Mixer MS-300
  2. Press the ▲ or ▼ key to set the stirring speed, the speed bar on display will show the run status.Magnetic Stirrer Hotplate Mixer MS-300
  3. If the stirrer does not work well, move the container slightly, ensure that the stir bar is always in the center of the container.
Setting the Stirring Time

MS-400 magnetic stirrer has a built-in timer that allows the user to set the stirring time from 1 to 999 minutes.

  1.  Press the Time key to enter the setting mode, the display shows “000 min”.Magnetic Stirrer Hotplate Mixer MS-300
  2. Press the ▲ or ▼ key to set the stirring time, press the Enter key to confirm. The timer automatically begins a countdown until it gets to zero, the stirrer will stop the stirring simultaneously.
    Magnetic Stirrer Hotplate Mixer MS-300
  3. If you want to exit the setting, press the Exit key.
Heating the Liquids

This section is applicable to MS-300 magnetic stirrers.

  1. Insert the connector of temperature probe into the corresponding connector socket on the rear panel of stirrer.Magnetic Stirrer Hotplate Mixer MS-300
  2. Place the temperature probe into the liquid.Magnetic Stirrer Hotplate Mixer MS-300
  3. Press the °C key and the ▲ or ▼ key to set the target temperature, press the Enter key to confirm. The stirrer is now beginning to heat.

Reviews

There are no reviews yet.


Be the first to review “Magnetic Stirrer Hotplate Mixer (MS-300)”